现货ASA/PC Luran S KR2861/1C 德国巴

厂家(产地)	德国巴斯夫
牌号	KR2861/1C
加工级别	注塑级
特性级别	抗紫外线,高抗冲,耐候
销售方式	品牌经销
类型	标准料
规格级别	注塑级

东莞市东如信塑胶原料有限公司长期供应德国巴斯夫 Styrolution’s  Luran S  ASA，ASA/PC，长期供应，柜货订购，原厂原装，可开**，可送货上门，可到仓库看货，可提供材质报告，物性表、MSDS、REACH、SGS、 出厂证明，外加技术指引等，欢迎来电洽谈，电话：15818367582/18938556268，刘先生

 

Luran SC KR2861/1C主要色号：

Luran S KR2861/1C BEMAdd to BookmarksLuran S KR2861/1C Black BK26410Add to BookmarksLuran S KR2861/1C Black BK35914Add to BookmarksLuran S KR2861/1C Black BK37431Add to BookmarksLuran SC KR2861/1C BK89828Add to BookmarksLuran SC KR2861/1C NRAdd to BookmarksLuran S KR2861/1C Q105 NaturalAdd to BookmarksLuran SC KR2861/1C Q105 WT31425PAdd to BookmarksLuran S KR2861/1C Q161 NaturalAdd to BookmarksLuran S KR2861/1C Q461 Black BK89828Add to BookmarksLuran S KR2861/1C SPLAdd to BookmarksLuran SC KR2861/1C SW36870PAdd to Bookmarks

 

Luran SC KR2861/1C 简介：

Luran S KR2861/1C is a blend of ASA and PC providing high heat resistance and extraordinary impact strength

 

Luran SC KR2861/1C 物性表：Property, Test ConditionStandardUnitValues

Rheological Properties
Melt Volume Rate 220 °C/10 kg	ISO 1133	cm³/10 min	3.5
Mechanical Properties
Izod Notched Impact Strength, 4mm bar, 0.25mm Notch Radius, 23 °C	ISO 180/A	kJ/m2	60
Izod Notched Impact Strength, 4mm bar, 0.25mm Notch Radius, -30 °C	ISO 180/A	kJ/m2	15
Charpy Notched Impact Strength, 23° C	ISO 179	kJ/m²	60
Tensile stress at yield, 23° C	ISO 527	MPa	53
Tensile strain at yield, 23° C	ISO 527	%	4.9
Tensile Modulus	ISO 527	MPa	2300
Tensile Creep Modulus (1000h)	ISO 899	MPa	1600
Tensile Creep Modulus (1h)	ISO 899	MPa	2000
Elongation at Break (MD)		%	>50
Flexural Strength	ISO 178	MPa	78
Ball Indentation Hardness	ISO 2039-1	MPa	95
Thermal Properties
Vicat Softening Temperature VST/B/50 (50°C/h, 50N)	ISO 306	°C	120
Vicat Softening Temperature, VST/A/50 (50°C/h, 10N)	ISO 306	°C	136
Heat Deflection Temperature; (annealed) method Af, 1.8 MPa	ISO 75	°C	106
Heat Deflection Temperature; (annealed) method Bf, 0.45 MPa	ISO 75	°C	125
Linear Mold Shrinkage	ISO 294-4	%	0.3 - 0.7
Coefficient of Linear Thermal Expansion	ISO 11359	10-6/°C	70 - 90
Thermal conductivity	DIN 52612-1	W/(m K)	0.17
Electrical Properties
Dielectric Constant (100 Hz)	IEC 60250	-	3.4
Dissipation Factor (100 Hz)	IEC 60250	-	60
Dissipation Factor (1 MHz)	IEC 60250	-	150
Volume Resistivity	IEC 60093	Ohm*m	1E12
Surface Resistivity	IEC 60093	Ohm	1e+013
Other Properties
Density	ISO 1183	kg/m3	1150
Water absorption saturated at 23°C	ISO 62	%	0.9
Processing
Processing (Melt) Temperature	ISO 294	°C	260 - 300
Mold Temperature	ISO 294	°C	80
Injection velocity	ISO 294	mm/s	200
Drying Temperature		°C	100 - 110
Drying Time		hr	2 - 4

主要供应的德国巴斯夫ASA/PC型号： 

Luran SC KR2861/1C      High heat resistance，High impact strength，高耐热，高抗冲击。
Luran SC KR2863C     Highest heat resistance，High impact strength，超高耐热，高抗冲击。
Luran SC KR2864C     High flow ability，High heat resistance，高耐热，流动性好。
Luran SC KR2866C     Good heat resistance，Medium impact strength，耐热性好，中等抗冲击强度。
Luran SC KR2867CWU     Highest flowability，V0 classification，防火V-0级，高流动。