通过 
TITANLENE® LDF 260GG 物性表
低密度聚乙烯
Lotte Chemical Titan (M) Sdn. Bhd.
产品说明：
LDF260GG is a low density polyethylene resin for film extrusion. LDF260GG has medium slip and anti-block additives. LDF260GG meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c) 2.2.
APPLICATIONS:
Laundry film, Textile packaging, Produce film, Diaper backing.
Characteristics:
Good drawdown and excellent processability.
APPLICATIONS:
Laundry film, Textile packaging, Produce film, Diaper backing.
Characteristics:
Good drawdown and excellent processability.
基本信息
物理性能额定值单位制测试方法
薄膜额定值单位制测试方法
热性能额定值单位制测试方法
光学性能额定值单位制测试方法
挤出额定值单位制
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 加工方法 |
|
| 密度 | 0.922 | g/cm³ | ASTM D1505 |
| 熔流率（熔体流动速率） (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| 薄膜厚度 - 经测试 | 30 | µm | |
| 割线模量 | ASTM D882 | ||
| 1% 正割, MD : 30 µm, 吹塑薄膜 | 186 | MPa | ASTM D882 |
| 1% 正割, TD : 30 µm, 吹塑薄膜 | 206 | MPa | ASTM D882 |
| 抗张强度 | ASTM D882 | ||
| MD : 断裂, 30 µm, 吹塑薄膜 | 19.6 | MPa | ASTM D882 |
| TD : 断裂, 30 µm, 吹塑薄膜 | 17.7 | MPa | ASTM D882 |
| 伸长率 | ASTM D882 | ||
| MD : 断裂, 30 µm, 吹塑薄膜 | 250 | % | ASTM D882 |
| TD : 断裂, 30 µm, 吹塑薄膜 | 440 | % | ASTM D882 |
| 落锤冲击 (30 µm, 吹塑薄膜) | 75 | g | ASTM D1709 |
| 埃尔曼多夫抗撕强度 | ASTM D1922 | ||
| MD : 30 µm, 吹塑薄膜 | 290 | g | ASTM D1922 |
| TD : 30 µm, 吹塑薄膜 | 120 | g | ASTM D1922 |
| 维卡软化温度 | 93.0 | °C | ASTM D1525 |
| 雾度 (30.0 µm, 吹塑薄膜) | 7.0 | % | ASTM D1003 |
| 熔体温度 | 160 到 180 | °C |
仓库物料展示
021-80107851